Rosco reversible Marley dance floor roll - view 1

ROSCO REVERSIBLE · TWO SURFACES

Rosco Reversible Marley Roll

Pre-order Ships the week of July 27, 2026
$233.50 / roll Made to order

Two surfaces, one engineered roll. Rosco's reversible marley is built around a glass-mesh interlayer between two PVC layers — construction that holds the floor flat against temperature swings, sun exposure, and the wear of repeated set-up and tear-down. Soft-shoe focused, fast to lay, made in Europe. Why reversible Two surfaces in one roll — flip the floor for varied repertoire or to even out wear Glass-mesh interlayer resists rippling, buckling, expansion, and shrinkage Non-skid matte finish — controlled slip without rosin Light enough for touring at 1.72 lbs/ft 3-year warranty Specifications Width: 63" Length: Full roll (131.3 ft), pre-cut, or custom cut, 10 ft minimum Material: Two PVC outer layers with woven glass fiber interlayer Thickness: ~1.2 mm Weight: 1.72 lbs/linear ft (226 lbs per full roll) Floor speed: Medium Shoe style: Soft only (ballet, pointe, modern, jazz, lyrical, contemporary, hip-hop, breaking, drill) Installation: Temporary or semi-permanent Origin: Made in Europe Warranty: 3 years Built for Professional studios — soft-shoe disciplines, daily class wear Touring and theatrical productions — portable, dimensionally stable Semi-permanent installs — sized to fit, two surfaces extend lifespan Disciplines Ballet (including pointe), jazz, lyrical, modern, hip-hop, contemporary, breaking, drill team. Soft shoes only — for tap and hard-sole work, see Rosco Adagio. Custom-cut rolls are cut in whole-foot increments with a 10 ft minimum. Inspect prior to installation — manufacturing defects are covered by warranty.

Color Black/Gray Reversible
Length
5.25′ × 10′ · 52.5 sqft
Your roll $233.50
Custom cut 5.25′ × 10′
Cut to any length from 10 to 131 ft
10ft long
10′ 43′ 86′ 131′
Pre-order — ships when stock arrives For all soft-shoe dance styles 3-year limited warranty · Custom cuts are final sale
Rolls
Built for the studio

Specifications

Two surfaces, one engineered roll — glass-mesh stability for touring and daily class.

Material
Two PVC layers around a woven glass-fiber interlayer
Thickness
~1.2 mm
Width
63" (5.25 ft)
Weight
1.72 lbs per linear foot
Floor speed
Medium
Shoe style
Soft only — ballet, pointe, modern, jazz, contemporary
Installation
Temporary or semi-permanent
Warranty
3-year limited
Origin
Made in Europe
Set it up in an afternoon

Installation

Lay it down once and you're done. No subfloor work, no adhesives, no studio downtime longer than a lunch break.

  1. Acclimate the rolls

    Lay the rolls flat in the studio for 24 hours so the vinyl matches the room's temperature and humidity.

    Tip · 65–75°F and under 60% RH is the sweet spot.

  2. Sweep and dry the sub-floor

    Concrete or sprung wood, the only thing under our flooring should be the sub-floor itself — no dust, no debris.

  3. Roll it out

    Start at the longest wall. Unfurl with the printed arrows pointing the same direction across the whole room.

    Tip · Leave a ⅛" expansion gap at every wall — the vinyl breathes.

  4. Seam and tape

    Butt seams tight. Run double-sided marley seam tape down the middle of each join and perimeter tape around the edges.

  5. Walk it in

    Light foot-roll along seams, then dance class as normal. Most studios open the next morning.

Made to last

Care & maintenance

Three quick habits will keep your floor looking studio-fresh year after year.

Dust mop

A microfiber dust mop before the first class catches the rosin powder that wears down the finish.

Daily

Damp mop

Once a week, run a barely-damp mop with a pH-neutral cleaner — never vinegar, never bleach.

Weekly

Deep clean

Quarterly, lift the perimeter tape, mop edges, dry, and re-tape. The seams thank you.

Quarterly

Do

  • Dust mop daily, before class.
  • Damp mop weekly with a pH-neutral cleaner.
  • Air-dry between cleanings.

Don't

  • Never use vinegar, bleach or floor wax.
  • No steel wool, scouring pads, or steam mops.
  • Don't drag heavy furniture without sliders.
FAQ

Questions, answered

Studio owners ask us these every week. If yours isn't here, we're an email away.

How is the price calculated?

Price is per linear foot at a fixed 63" (5.25 ft) width. Pick a color, choose your length in feet, and the page shows your exact total before you add to bag.

What's the minimum and maximum cut?

Custom cuts run from 10 ft to 131 ft in whole-foot increments.

Can I get an exact length?

Yes — we cut to the foot. If you need half-foot precision, leave a note in your order and we'll honor it. We err generous on cuts (an extra inch or two), never short.

How long does a custom cut take to ship?

Custom cuts ship in 3–5 business days from our network of US warehouses, then 2–5 days transit depending on your zone. Need it faster? Email us — we run rush cuts for events and openings.

Can I return a custom-cut roll?

Custom-cut rolls are non-returnable, but we'll always replace defects or shipping damage at no charge. To avoid surprises, order a free sample pack first.

What's the warranty?

Rosco Reversible carries a 3-year limited warranty against manufacturing defects under normal use. If the material fails, we replace the affected section. Full terms on the warranty page.

Can I tap on Rosco Reversible?

No — this roll is for soft shoes only: ballet, pointe, modern, jazz, lyrical, contemporary, hip-hop. For tap and hard-sole work, choose Rosco Adagio.